@article { author = {Jaafari, Fereshteh and Agh-Atabai, Maryam and Biglari Fadafan, Ali and Nemati, Majid}, title = {Investigating the effect of stratigraphic heterogeneity on the stress distribution resulting from the activity of blind thrust faults using numerical modeling}, journal = {Advanced Applied Geology}, volume = {12}, number = {4}, pages = {768-786}, year = {2023}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2251-7057}, eissn = {2717-0764}, doi = {10.22055/aag.2021.38793.2253}, abstract = {Blind thrust faults are not visible on the ground, but they are able to grow and transfer stress to the surface and surrounding areas during earthquakes. The sequence covering the blind faults, which may be composed of different sedimentary units, can affect the growth of rupture and the distribution of stresses due to the movement of these faults. In this study, the effect of stratigraphic heterogeneity on stress distribution has been evaluated using numerical technique (Finite Element method). The simulation results show that the stress concentration in the salt layer and its overlying sequence is significantly reduced compared to the homogeneous model. While in the underlying layers of salt compared to the homogeneous state, more stress has accumulated in a larger area. Furthermore, comparison of the diagrams of vertical displacement show that despite the similar distribution pattern, the displacement values in the heterogeneous model is larger than the homogeneous one. Therefore, it can be concluded that the presence of ductile layers such as salt in the sedimentary sequence, increases the probability of rupture growth (due to stress concentration) in its underlying layers and reduces or stops the rupture growth towards the overlying layers and the ground surface (due to the sharp reduction of stress in the ductile layer). On the other hand, due to the higher degree of deformation (displacement) in the top layers, they facilitate the formation of new fold and fault structures.}, keywords = {Blind thrust faults,Heterogeneous,stress,Vertical displacement,Numerical simulation}, title_fa = {بررسی اثر ناهمگنی چینه‌ای بر توزیع تنش حاصل از فعالیت گسل‌های راندگی پنهان با استفاده از مدل‌سازی عددی}, abstract_fa = {گسل‌های راندگی پنهان در سطح زمین قابل مشاهده نیستند اما در طی حوادث لرزه ای قادر به رشد و انتقال تنش به سمت سطح و نواحی پیرامون می‌باشند. توالی پوشاننده گسل‌های پنهان ممکن است از واحدهای رسوبی مختلفی تشکیل شده باشند که می‌تواند در نحوه رشد گسیختگی و توزیع تنش ناشی از جنبش این گسل‌ها تاثیرگذار باشد. در این پژوهش، چگونگی اثر ناهمگنی چینه‌ای بر توزیع تنش، با استفاده از روش عددی (روش اجزای محدود) مورد ارزیابی قرار گرفته است. نتایج شبیه‏ سازی نشان می دهد که تمرکز تنش در لایه نمک و توالی رویی آن نسبت به مدل همگن کاهش محسوسی پیدا کرده است. در حالی که در لایه‌های زیرین نمک نسبت به وضعیت همگن، افزایش تنش بیشتر در محدوده‌ بزرگتری اتفاق افتاده است. علاوه براین، مقایسه نمودارهای توزیع جابجایی قائم در دو مدل همگن و ناهمگن نشان می‌دهند که با وجود الگوی توزیع مشابه، میزان جابجایی در مدل ناهمگن بیشتر از مدل همگن می‌باشد. بنابراین، می‌توان اظهار داشت که حضور لایه‌های شکل‌پذیر مشابه نمک، از یک سو موجب افزایش احتمال رشد گسیختگی (به دلیل تمرکز تنش) در لایه‌های زیرین و کاهش یا توقف رشد گسیختگی به سمت لایه های رویی و سطح زمین (به سبب کاهش شدید تنش در لایه شکل‌پذیر) شود. از طرف دیگر، به دلیل بالاتر بودن میزان دگرشکلی (جابجایی) در لایه های رویی تشکیل ساختارهای جدید چین و گسل را تسهیل می‌کنند.}, keywords_fa = {گسل‌ راندگی پنهان,ناهمگنی,تنش,جابجایی قائم,شبیه‌سازی عددی}, url = {https://aag.scu.ac.ir/article_17725.html}, eprint = {https://aag.scu.ac.ir/article_17725_a89fe6d8be9e81b20f9fb0823b3ab27f.pdf} }