@article { author = {Pishro, Fatemeh and Bakhtiari, Morteza and Shani Karam Zadeh, Nima}, title = {Laboratory Evaluation Soil Mechanics Indices on Permeability Anisotropic of Non-uniform Coarse Particles: Emphasis on Grading, Shape Factor and Compaction}, journal = {Advanced Applied Geology}, volume = {7}, number = {2}, pages = {57-64}, year = {2017}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2251-7057}, eissn = {2717-0764}, doi = {10.22055/aag.2017.21062.1665}, abstract = {    Geotechnical parameters is of one of the most important indices on the topics of engineering geology. Therefore, the purpose of industrial development and structural, geotechnical engineering and geological information provide a comprehensive database is essential.The permeability is one of the most important physical properties of soil that has been used in geotechnical engineering. Soil permeability generally depends on two factors, one factor is soli properties contains porosity, The surface roughness of solid particles, Saturation and another factor is fluid (water) properties which passes through the soil. In order to do research The design and testing device for measuring horizontal and vertical permeability In the case of coarse particles. In this study, three non-uniform samples is selected for test. The results show the permeability anisotropy for non-uniform sample is between 1.32-3.5 also with increasing the uniform coefficient the rate of anisotropy permeable decreased. Also in the non-uniform samples with the increases percentage of fine particles (particles with a diameter smaller than 4.75 mm) decreases the permeability anisotropy. According to results The use of fine particles in the implementation of various schemes marine structures is recommended.  }, keywords = {Permeability,C oarse soil samples,anisotropy,Grading,Geological engineerin}, title_fa = {بررسی آزمایشگاهی شاخص های مکانیک خاک بر نفوذپذیری ناهمسانگرد مصالح درشت دانه غیریکنواخت: با تأکید بر دانه بندی، فاکتور شکل و تراکم}, abstract_fa = { بررسی پارامترهای ژوتکنیکی ، یکی از مهمترین شاخص های مورد مطالعه در مباحث زمین شناسی مهندسی به تعداد می رود. به همین منظور جهت ساخت صنعتی و سازه ای ، تهیه بانک جامع اطلاعات زمین شناسی مهندسی و ژوتکنیک ضروری است. در این راستا ، نفوذپذیری از مهمترین مشخصات فیزیکی خاک است که در مهندسی ژوتکنیک استفاده شده است. نفوذپذیری خاک به دو عامل کلی بستگی دارد ، یکی از مشخصات خود را شامل خاک خالی خاک ، سطح ذرات جامد ، درجه اشباع و سایر مشخصات سیالی (آب) است که از آن عبور می کند. برای انجام تحقیق حاضر ، اقدام به طراحی و آزمایش دستگاه برای اندازه گیری نفوذپذیری افقی و قائم درنمونه ذرات درشت نگهداری می شود. در تحقیق حاضر سه نمونه با دانهبندی غیر یکنواخت برای آزمایش انتخاب گردیده است. نتایج حاصل از تحقیق نشان می دهد میزان عدم توجه نفوذپذیری بد است برای نمونه های غیر یکنواخت در محدوده 32/1 تا 5/3 قرار گیرد ، نتیجه دیگر آنکه با افزایش ضعف یکنواختی باعث عدم توجه به نفوذ شما می شود. همچنین در نمونه های غیر یکنواخت با افزایش میزان ذرات ریز (ذراتی با قطر کوچکتر از 75/4 میلی متر) میزان عدم توجه نفوذپذیری افزایش می یابد. با توجه به نتایج به دست آمده استفاده از ذرات ریزدانه در اجرای طرح های سازه های مختلف دریایی توصیه می شود.}, keywords_fa = {: نفوذپذیری,ذرات درشت دانه,ناهمسانگردی,دانه بندی,زمین شناسی مهندسی}, url = {https://aag.scu.ac.ir/article_13230.html}, eprint = {https://aag.scu.ac.ir/article_13230_fc5142700fb435d10e62721c071e5701.pdf} }