@article { author = {Partabian, Abdolreza and Fotohi, Samad and Rigi, Mohammad}, title = {A Comparison of efficiency of the landslide hazard zonation using the Value Information and Density Area Models in Sistan and Baluchestan province}, journal = {Advanced Applied Geology}, volume = {7}, number = {2}, pages = {1-11}, year = {2017}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2251-7057}, eissn = {2717-0764}, doi = {10.22055/aag.2017.13223}, abstract = {     Landslide is one of the natural hazards that causes physical and financial harm every year around the world. Landslide zoning is an important step towards landslide hazard and risk management. To find an appropriate model for landslide hazard zonation in Sistan and Baluchestan province, the efficiency of two models, including Value information and Density Area were tested. For this purpose at first, a landslide inventory map was prepared using previous reports and field surveys. Then maps of ten effective factors in the occurrence of landslide were prepared and classified. The weight of each factor’s classes were calculate based on two model of Value Information and Density Area .Then landslide hazard zonation maps were developed by using the Geographic Information System and crossing layers in Arc GIS software. These hazard maps show that areas with high attitude and flysch rock formation as well as areas where located along the major faults are prone and areas with low altitude are not prone to landslide. To compare methods and determine their efficacy relative to each other Sum quality (Qs) and precision (P) indices were used. Higher value of these indices for Value information show that this method more effective than Density area method in landslide hazard zonation in this area.  }, keywords = {Hazard zonation,Landslide,Value Information method,Density Area method,Sistan and Baluchestan province}, title_fa = {مقایسه کارایی پهنه‌بندی خطر زمین‌لغزش با استفاده از مدل‌های ارزش اطلاعات و تراکم سطح در استان سیستان و بلوچستان}, abstract_fa = {زمین لغزش یکی از مخاطبان طبیعی است که هرساله باعث خسارات جانی و مالی فراوانی در سراسر جهان شده است. پهنه‌بندی زمین لغزش مورد توجه قرار گرفت تا بتواند خطرناک باشد و در برنامه‌های مورد نیاز مورد استفاده قرار گیرد. در این مطالعه کارایی دو مدل اطلاعاتی ارزشمند و سطح تراکم به دلیل خطرناک بودن زمین لغزش در استان سیستان و بلوچستان مورد آزمایش قرار گرفته است. بدین منظور در نقشه برداری از زمین الغزشهای رویاداده تهیه شده است ، پس از آنکه اطلاعات مربوط به 10 عارضه مؤثر در صورت تهیه و ساخت طبقه بندی شود ، مورد استفاده قرار می گیرد. در مرحله بعد با استفاده از مدل های تراکم سطح و ارزش اطلاعات وزن سبک هر معیار محاسبه ساخته شده است. سپس نقشه خطرناک بودن زمین لغزش را با استفاده از سیستم اطلاعات جغرافیایی و تلفیق آن ها در محیط نرم افزارافزار Arc GIS تهیه کرد. این نقشه ها عمدتا به راحتی مرتب می شوند با لیتیولوژی فیلیشی و پزشکی که در امتداد گسلهای اصلی قرار دارند تا مستعد زمین الغزش و مناطق پست را بدون استعداد نشان دهند. بهمنظور مقایسه روش های مربوط به میزان و کارآمدی آن را با کیفیت بالا (Qs) و دقت (P) موردبررسی قرار گرفت. مقدار این شاخص برای مدل ارزش اطلاعات کارایی بیشتر آن نسبت به مدل تراکم سطح جهت پهنایبندی زمین است که به دلیل عدم وجود آن مشخص شده است.}, keywords_fa = {پهنه‌بندی خطر,زمین‌لغزش,روش ارزش اطلاعات,روش تراکم سطح,استان سیستان و بلوچستان}, url = {https://aag.scu.ac.ir/article_13223.html}, eprint = {https://aag.scu.ac.ir/article_13223_f87489ba3ccb4a54cb656583fceb93b4.pdf} }