@article { author = {Neyamadpour, Ahmad}, title = {Underground Cavity Investigation Using 3D Electeical Resistivity Imaging Method}, journal = {Advanced Applied Geology}, volume = {5}, number = {4}, pages = {15-24}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2251-7057}, eissn = {2717-0764}, doi = {10.22055/aag.2015.11889}, abstract = {     Applicability of three kinds of electrode configurations to delineate an underground cavity was studied. A 3D resistivity imaging survey was carried out along eight parallel lines using pole-pole, pole-dipole, and dipole-dipole arrays with 1 m minimum electrode spacing. Roll-along measurements were carried out to cover a rectangular grid. The 3D least squares algorithms based on the robust inversion method, was used in the inversion of the apparent resistivity data sets. To obtain the better results, 3D joint inversion of the pole-pole + pole-dipole and pole-pole + dipole-dipole datasets were performed as well as the pole-dipole + dipole-dipole datasets. In this case, both horizontal and vertical dimensions of subsurface cavity were resolved. The resulting model with the ones obtained from each array was compared separately. The result showed the joint inversion improves the investigation depth obtained by the survey. However the horizontal resolution in shallow layers remains acceptable.  }, keywords = {3D ERI,Apparent resistivity,Underground cavity,Joint inversion,Electrode array}, title_fa = {مطالعه حفره های زیر سطحی با استفاده از روش تصویر سازی سه بعدی مقاومت الکتریکی}, abstract_fa = {    کاربرد سه نوع آرایه معمولی جهت شناسایی یک حفره زیرزمینی بررسی شده است. تصویربرداری سه بعدی مقاومت الکتریکی در امتداد هشت پروفیل موازی با استفاده از آرایه های طبیعی قطبی- قطبی ، قطبی-دوقطبی و دوقطبی- دوقطبی با فاصله بین ایمنی یک متر و شبکه مستطیلی صورت گرفت. برگردانی سازی داده شده توسط یک الگوریتم وارونی سازی سه بعدی مبتلا به روش برگردان سازی هوشمند انجام شده است. جهت بدست آوردن نتایج بهتر ، برگردانی سازی الحاقی جفت داده های قطبی- قطبی + قطبی- دوقطبی ، قطبی- قطبی + دوقطبی-دوقطبی و قطبی- دوقطبی + دوقطبی- دوقطبی انجام شد. ابعاد افقی و قائم حفره در نتایج وارونیزه سازی الحاقی داده های مقاومت الکتریکی بخوبی مشخص شده است. مدل های ایجاد شده با نتایج برگردان سازی هر کدام از آرایه های قدرتمند بصورت مجزا مقایسه شده است. نتایج به دست آمده نشان می دهد که وارون سازی الحاقی داده ها نیز به خوبی تفسیر کرده است. }, keywords_fa = {کلمات کلیدی: تصویر سازی سه بعدی,مقاومت الکتریکی ظاهری,حفره زیر زمینی,وارون سازی الحاقی,آرایه الکترودی}, url = {https://aag.scu.ac.ir/article_11889.html}, eprint = {https://aag.scu.ac.ir/article_11889_62e3e8c0a301b043db91d52073f7e06a.pdf} }